Questions and solutions for flight sim related problems
-
:FI:Nellip
- Post Maniac 2nd Grade
- Posts: 1577
- Joined: Wed May 21, 2003 7:09 pm
- Location: North Yorkshire - God's own country
Post
by :FI:Nellip » Sun Nov 20, 2005 5:28 pm
My 9700 Pro has developed the same issues as Ardmores - lots of pretty red lines and strange graphic effects when the card has been running for a few minutes. I have had the guts of the machine out on the kitchen table and it seems like the fan that sits on the heat sink for the GPU is not spinning
I have put an old graphics card in for now but looks like I won't be doing any IL2 until my new PC arrives next month.
Not sure if you can get a replacement for these built in fans but I did see this on DABS
http://www.dabs.com/productview.aspx?Qu ... PageMode=1" onclick="window.open(this.href);return false;
and I do have a spare slot I could use
Any body got any experience with these?
-
:FI:RULES
- Forum Junky
- Posts: 581
- Joined: Sat Jan 31, 2004 11:36 am
- Location: Borås,Sweden
Post
by :FI:RULES » Sun Nov 20, 2005 6:17 pm

Hmmm. maby you should check this out...
http://www.zalmantech.com/" onclick="window.open(this.href);return false;
A friend of mine hade the same problem and got one of Zalman´s VGA-cooler´s and it worked like a dream...at a low prize...
"Ammunition clearance is a science with uncertain assumptions, based on disputed calculations. Derived from none convincing experiments carried out by persons with doubtful reliability and questioned mental capacities using instrument of doubtful precision".
-
:FI:Mefisto
- Forum Junky
- Posts: 609
- Joined: Wed Jul 20, 2005 3:31 pm
- Location: Koszalin /Poland
Post
by :FI:Mefisto » Sun Nov 20, 2005 6:36 pm
once again i would advice AC
http://www.arctic-cooling.com/vga2.php?idx=41
zalmans are rather expensive...
even some radiator e.g. for northbridge could do the trick i think, with radeon 8500 i used ZM-NB47J
those exhausts (in general) are cr@p
-
Guest
Post
by Guest » Sun Nov 27, 2005 11:13 pm
Yup, I put one on my X800 XT and it worked like a charm, had to get the optional fan, though. IT's really easy to put on and knocks about 10-15C off of your operating temprature. everything runs much more stable now.